INFINITY porcelain slabs are large-format surfaces made in Italy by Infinity, a brand of Italy’s Gruppo Concorde. Each slab measures 160 × 320 cm and comes in 6, 12 or 20 mm thicknesses, with effects ranging from Calacatta and Statuario marble to travertine, concrete, metal and onyx.
Porcelain is dense and low in porosity, and Infinity’s slabs are made to resist heat, scratches and stains, so they suit kitchen benchtops, splashbacks, vanities, feature walls and floors, and 20 mm slabs can be used outdoors. See the INFINITY range in person at our Sydney and Brisbane showrooms.
ARKÈON is Infinity’s design platform for architecture and interiors: a curated collection of 160 × 320 cm porcelain surfaces developed by Infinity Lab, the brand’s research centre, together with outside designers.
Rather than copying a single stone, ARKÈON explores texture, from the grain of sandstone to the soft, matte depth of plaster and the character of fossil stone. The surfaces are made for large walls, joinery, benchtops and furniture, where the full slab size keeps joins to a minimum.
Sandstone brings the soft, layered grain of quarried sandstone in warm, light, silver and grey tones. Plaster recreates the calm, hand-finished look of plastered walls in snow, sand and bone. Fossil adds the character of a stone with natural inclusions.
Because every surface comes in the 160 × 320 cm format, a single slab can wrap a kitchen island, line a shower wall or form a tabletop with very few joins, and the same design can run from floor to wall to benchtop for a calm, continuous look.
Infinity describes ARKÈON as an open system: the collection keeps growing as Infinity Lab develops new surfaces with architects and designers, and Infinity’s Project Division supports larger architecture and commercial projects.
We stock 8 ARKÈON designs: Fossil, Plaster Bone, Plaster Sand, Plaster Snow, Sandstone Gray, Sandstone Light, Sandstone Silver, Sandstone Warm.
Pick a look to jump straight to it in our INFINITY range.
Marble effectContinuous veining inspired by Calacatta, Statuario and other classic marbles.View marble designs
Stone effectNatural stone shades and mineral detail, from travertine to limestone.View stone designs
Onyx effectTranslucent depth and bold veining, from Taj Mahal to Crystal.View onyx designs
Material effectTextured surfaces with the relief of sandstone, fossil and plaster.View material designs
Cement effectMatte, minimal concrete looks for modern spaces.View cement designs
Metal effectOxidised steel and Corten surfaces with an industrial edge.View metal designs
Resin effectSmooth, seamless resin-style surfaces in soft neutrals.View resin designs
Terrazzo effectClassic terrazzo, with stone chips set in a fine base.View terrazzo designs
Solid effectPure, uniform black and white.View solid designs
Wood effectThe warmth of timber grain, in porcelain.View wood designs
Hyle effectDistinctive patterned designs.View hyle designs
Mosaic effectGeometric mosaic patterns.View mosaic designs
The INFINITY designs our customers ask about most.
Taj MahalINFINITY porcelain
Calacatta ViolaINFINITY porcelain
Travertino ChiaroINFINITY porcelain
Royal PeacockINFINITY porcelain
Calacatta MagnificoINFINITY porcelain
Milan StoneINFINITY porcelain
Metal CortenINFINITY porcelain
MagellanoINFINITY porcelain
Atlantis GreyINFINITY porcelain
Calacatta OroINFINITY porcelainThe same design can look and feel quite different depending on its finish. Pick a finish to see every INFINITY slab we stock in it.
The latest INFINITY designs to arrive in our warehouses.
6 mm for walls, cladding, floors and furniture, including over existing surfaces. 12 mm is Infinity’s recommended thickness for kitchen benchtops, vanities and tabletops. 20 mm for outdoor floors and walls, and surfaces that need the most strength.
Infinity’s Natura Body Tech carries colour and pattern through the full thickness of the slab, and Natura Vein Tech runs the veining right through 12 and 20 mm slabs, so cut edges and sink cut-outs look natural. Look for the “Vein Tech” designs in our range.
INFINITY porcelain is made to resist heat, scratches and chemicals and absorbs very little water. Clean it with a neutral detergent and a soft cloth, and avoid abrasive pads and powders.
Beyond the SurfacePorcelain, Made Not BornPorcelain is the only material in the SNB Stone range that is manufactured, not quarried. That distinction matters. Where natural stone carries the unpredictability of the earth, the unique vein, the subtle shift in tone,…Read the article
Porcelain looks different in daylight than on a screen, so it is worth seeing a slab before you choose. The INFINITY range is available through our Sydney and Brisbane showrooms. In Victoria, see our FONDOVALLE porcelain range at our Melbourne showrooms.
Yes. Infinity recommends 12 mm slabs for kitchen benchtops, and 20 mm slabs are also used. The porcelain is made to resist heat, scratches and stains, and its low water absorption makes it easy to keep clean.
Yes. Infinity recommends 20 mm slabs for outdoor floors and walls, which it says resist weather, UV and changes in temperature.
6 mm slabs suit walls, cladding, floors and furniture, and can go over existing surfaces. 12 mm is the recommended thickness for kitchen benchtops, vanities and tabletops, and 20 mm suits outdoor areas and surfaces that need the most strength.
Use a neutral detergent and a soft cloth, and avoid abrasive pads and powders.
INFINITY porcelain is available through our Sydney (Strathfield South) and Brisbane (Pinkenba) showrooms. In Victoria, see our FONDOVALLE porcelain range at our Melbourne showrooms.
More answers on our FAQ page.