Established 1995

Sydney: 02 9793 2001

Brisbane: 07 3630 0001

Melbourne: 03 9330 3321

INFINITY Porcelain Slabs

INFINITY porcelain slabs are large-format surfaces made in Italy by Infinity, a brand of Italy’s Gruppo Concorde. Each slab measures 160 × 320 cm and comes in 6, 12 or 20 mm thicknesses, with effects ranging from Calacatta and Statuario marble to travertine, concrete, metal and onyx.

Porcelain is dense and low in porosity, and Infinity’s slabs are made to resist heat, scratches and stains, so they suit kitchen benchtops, splashbacks, vanities, feature walls and floors, and 20 mm slabs can be used outdoors. See the INFINITY range in person at our Sydney and Brisbane showrooms.

INFINITY collection

ARKÈON

ARKÈON is Infinity’s design platform for architecture and interiors: a curated collection of 160 × 320 cm porcelain surfaces developed by Infinity Lab, the brand’s research centre, together with outside designers.

Rather than copying a single stone, ARKÈON explores texture, from the grain of sandstone to the soft, matte depth of plaster and the character of fossil stone. The surfaces are made for large walls, joinery, benchtops and furniture, where the full slab size keeps joins to a minimum.

Sandstone brings the soft, layered grain of quarried sandstone in warm, light, silver and grey tones. Plaster recreates the calm, hand-finished look of plastered walls in snow, sand and bone. Fossil adds the character of a stone with natural inclusions.

Because every surface comes in the 160 × 320 cm format, a single slab can wrap a kitchen island, line a shower wall or form a tabletop with very few joins, and the same design can run from floor to wall to benchtop for a calm, continuous look.

Infinity describes ARKÈON as an open system: the collection keeps growing as Infinity Lab develops new surfaces with architects and designers, and Infinity’s Project Division supports larger architecture and commercial projects.

We stock 8 ARKÈON designs: Fossil, Plaster Bone, Plaster Sand, Plaster Snow, Sandstone Gray, Sandstone Light, Sandstone Silver, Sandstone Warm.

View ARKÈON designs

Choosing INFINITY porcelain

Thickness

6 mm for walls, cladding, floors and furniture, including over existing surfaces. 12 mm is Infinity’s recommended thickness for kitchen benchtops, vanities and tabletops. 20 mm for outdoor floors and walls, and surfaces that need the most strength.

Colour and veining through the slab

Infinity’s Natura Body Tech carries colour and pattern through the full thickness of the slab, and Natura Vein Tech runs the veining right through 12 and 20 mm slabs, so cut edges and sink cut-outs look natural. Look for the “Vein Tech” designs in our range.

Performance and care

INFINITY porcelain is made to resist heat, scratches and chemicals and absorbs very little water. Clean it with a neutral detergent and a soft cloth, and avoid abrasive pads and powders.

See INFINITY porcelain in person

Porcelain looks different in daylight than on a screen, so it is worth seeing a slab before you choose. The INFINITY range is available through our Sydney and Brisbane showrooms. In Victoria, see our FONDOVALLE porcelain range at our Melbourne showrooms.

Book a showroom visit

INFINITY porcelain questions

Is INFINITY porcelain good for kitchen benchtops?

Yes. Infinity recommends 12 mm slabs for kitchen benchtops, and 20 mm slabs are also used. The porcelain is made to resist heat, scratches and stains, and its low water absorption makes it easy to keep clean.

Can INFINITY porcelain be used outdoors?

Yes. Infinity recommends 20 mm slabs for outdoor floors and walls, which it says resist weather, UV and changes in temperature.

Which thickness should I choose?

6 mm slabs suit walls, cladding, floors and furniture, and can go over existing surfaces. 12 mm is the recommended thickness for kitchen benchtops, vanities and tabletops, and 20 mm suits outdoor areas and surfaces that need the most strength.

How do I clean INFINITY porcelain?

Use a neutral detergent and a soft cloth, and avoid abrasive pads and powders.

Where can I see the INFINITY range?

INFINITY porcelain is available through our Sydney (Strathfield South) and Brisbane (Pinkenba) showrooms. In Victoria, see our FONDOVALLE porcelain range at our Melbourne showrooms.

More answers on our FAQ page.

Book a showroom visit

Pick a showroom and a time that suits you. Showrooms are open weekdays and Saturday mornings.