Infinity Crystal Ice Porcelain
Infinity Crystal Ice Porcelain
Crystal Ice Infinity Porcelain has structural, aesthetic and functional characteristics that make them an economic and an enduring material for many projects indoors or outdoors – especially for benchtops and vanities. This 12mm thick material is non-absorbent and resistant to acids, heat, scratches, abrasions and frost. Made from quality raw materials, these slabs are non-toxic that do not release micro-particles.
View our full Infinity Porcelain range in our Sydney or Brisbane Showroom.
Beyond The Surface
There is no place like home! Whether you are building, renovating or just interested in stone – be inspired,
discover the latest and keep up with the trends in one simple place: the SNB Stone Blog.
The History of Natural Stone
Discover how our natural stone types were formed, quarried and prized across the centuries, and what that means for the benchtops, floors and surfaces chosen in contemporary Australian homes today.
With shifting design tastes, we have found that granite has a perception problem, thanks to 1990s kitchen renovations, which could outlast us all. However, our close proximity to granite leads
Dolomite is so similar to marble that it has been used in its place for centuries. Flying under the radar of marble’s reputation is a history that goes back hundreds
Slate started out as mud on an ancient sea floor. Over hundreds of millions of years it was pressed into a stone people have used for roofs, floors and school
Limestone started life on the sea floor, built up over millions of years from shells and marine sediment. In this part of our History of Natural Stone series, we follow
Stone & Civilisation: Case Studies
Explore the landmark buildings, sculptures and cities shaped by stone, from Carrara marble in Rome to the sandstone of colonial Sydney, and see how those ideas still guide contemporary stone design.
The Taj Mahal is one of the most recognised buildings in the world. Made almost entirely of natural stone, this is a monument to a man’s love for his wife,
Understanding Porcelain
A clear guide to porcelain slabs and sintered stone: how they are made, how they compare with natural stone for heat, stain and scratch resistance, and where they suit kitchens and bathrooms best.
Porcelain is the only material in the SNB Stone range that is manufactured, not quarried. That distinction matters. Where natural stone carries the unpredictability of the earth, the unique vein,
Stone Care Guide
Practical advice on sealing, cleaning and protecting natural stone and porcelain surfaces. Learn how to lift stains, avoid etching and keep marble, granite and quartzite benchtops looking new for years.
In our 30+ years as a natural stone supplier, we’re still surprised by how often etching and staining get mixed up. Today we will dispel this myth with a simple
Latest from Beyond The Surface
With shifting design tastes, we have found that granite has a perception problem, thanks to 1990s kitchen renovations, which could outlast us all. However, our close proximity to granite leads
The Taj Mahal is one of the most recognised buildings in the world. Made almost entirely of natural stone, this is a monument to a man’s love for his wife,
In our 30+ years as a natural stone supplier, we’re still surprised by how often etching and staining get mixed up. Today we will dispel this myth with a simple
Porcelain is the only material in the SNB Stone range that is manufactured, not quarried. That distinction matters. Where natural stone carries the unpredictability of the earth, the unique vein,
Dolomite is so similar to marble that it has been used in its place for centuries. Flying under the radar of marble’s reputation is a history that goes back hundreds
Slate started out as mud on an ancient sea floor. Over hundreds of millions of years it was pressed into a stone people have used for roofs, floors and school
Beyond The Surface: Frequently Asked Questions
The questions we are asked most often about natural stone and porcelain — from where our marble, granite, quartzite and limestone is quarried, to how stone benchtops, tiles and pavers should be sealed and cleaned. Every answer comes from more than 30 years of importing and supplying stone to architects, designers, stonemasons and homeowners across Sydney, Melbourne and Brisbane.
Where does SNB Stone source its natural stone?
We employ inspectors in several locations around the world, and our directors travel continually to source material and inspect production standards. Every slab and tile is rated against a strict set of SNB Stone guidelines before it is imported. Where a stone is quarried actually matters far less than the technology used to cut, calibrate and finish it — which is why two blocks from the same mountain can arrive as very different products.
What is the best stone to use in a kitchen?
It comes down to the look you want and how the kitchen will be used. If you love the appearance of marble, a honed surface is far more forgiving than a polish. If you want maximum hardness, granite and quartzite are among the hardest natural stones available and offer a wide colour palette. We are always happy to talk through the trade-offs for your bench, island or splashback before you choose.
How should natural stone tiles and benchtops be cleaned?
We strongly recommend all natural stone is sealed with Dry Treat Stain Proof™. For basalt and granite, most household cleaners are fine. For marble, travertine, quartzite and limestone, use a clean damp cloth, or a pH neutral detergent for anything more stubborn. Avoid acidic and abrasive cleaners, and wipe up spills such as wine, citrus and oil promptly.
What is etching, and why does my marble have dull spots?
Etching is a chemical reaction, not a stain. Acid — from lemon, vinegar, wine or some cleaning products — reacts with the calcium in marble and limestone and leaves dull marks on the surface. Sealing reduces staining but does not prevent etching, so the answer is choosing the right finish, using the right cleaners, and having the surface re-honed if marks build up over time.
What is the difference between natural stone and reconstituted stone?
Natural stone is a product of nature — it forms more than 60% of the earth’s crust and is available in thousands of types and colours. Reconstituted (engineered) stone is manufactured, and suppliers typically market only 10 to 20 colours, many of the darker ones scratching easily, and it contains large amounts of resins and chemicals. Many natural stones have better properties and perform better in kitchens than reconstituted products.
Our Network
Everything you read in Beyond The Surface is built on a working supply chain. SNB Stone is a family business of more than 30 years that imports natural stone slabs, tiles, pavers, pool coping, mosaics and porcelain directly — with inspectors and directors at quarries and factories overseas, and five showrooms across Sydney, Melbourne and Brisbane where architects, designers, stonemasons, builders and homeowners can see full slabs in person before they commit.
30+ years
A family-owned importer and wholesaler of natural stone, supplying residential and commercial projects as well as other stone retailers.
5 showrooms
Strathfield South in Sydney, Airport West and Notting Hill in Melbourne, and Pinkenba and Geebung in Brisbane.
Global sourcing
Inspectors in several countries and directors travelling continually, rating every material against strict SNB Stone guidelines.
2 porcelain houses
Large-format porcelain and sintered surfaces from INFINITY and FONDOVALLE, sitting alongside our natural stone range.